dmesg - ASUS AMD Radeon RX 470
Linux version 4.19.0-10-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.132-1 (2020-07-24)
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009e01fff] usable
BIOS-e820: [mem 0x0000000009e02000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a20bfff] ACPI NVS
BIOS-e820: [mem 0x000000000a20c000-0x00000000db7f5fff] usable
BIOS-e820: [mem 0x00000000db7f6000-0x00000000db98afff] reserved
BIOS-e820: [mem 0x00000000db98b000-0x00000000dbb0efff] usable
BIOS-e820: [mem 0x00000000dbb0f000-0x00000000dbf2cfff] ACPI NVS
BIOS-e820: [mem 0x00000000dbf2d000-0x00000000dcbaafff] reserved
BIOS-e820: [mem 0x00000000dcbab000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000081f37ffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.2.0 present.
DMI: Gigabyte Technology Co., Ltd. X570 GAMING X/X570 GAMING X, BIOS F10 11/15/2019
tsc: Fast TSC calibration failed
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x81f380 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 base 0000DC2F0000 mask FFFFFFFF0000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000820000000 aka 33280M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xdc2f0000-0xdc2fffff] usable ==> reserved
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0xdf000 max_arch_pfn = 0x400000000
Using GB pages for direct mapping
RAMDISK: [mem 0x3141d000-0x34a05fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05A0 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DBEA90A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DBEAFFC0 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DBEA91F0 006DCB (v02 ALASKA A M I 01072009 INTL 20160930)
ACPI: FACS 0x00000000DBF15E00 000040
ACPI: APIC 0x00000000DBEB00D8 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DBEB0238 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000DBEB0280 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DBEB0320 0000FC (v02 ALASKA A M I 01072009 AMI 01072009)
ACPI: SSDT 0x00000000DBEB0420 008C98 (v02 ALASKA A M I 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000DBEB90B8 00374D (v01 ALASKA A M I 00000001 INTL 20160930)
ACPI: MCFG 0x00000000DBEBC808 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: SSDT 0x00000000DBEBC848 0093A7 (v01 ALASKA A M I 00000001 INTL 20160930)
ACPI: HPET 0x00000000DBEC5BF0 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000DBEC5C28 000024 (v01 ALASKA A M I 00001000 INTL 20160930)
ACPI: UEFI 0x00000000DBEC5C50 000042 (v01 ALASKA A M I 00000002 01000013)
ACPI: IVRS 0x00000000DBEC5C98 0000D0 (v02 ALASKA A M I 00000001 AMD 00000000)
ACPI: PCCT 0x00000000DBEC5D68 00006E (v01 ALASKA A M I 00000001 AMD 00000000)
ACPI: SSDT 0x00000000DBEC5DD8 003EC9 (v01 ALASKA A M I 00000001 AMD 00000001)
ACPI: CRAT 0x00000000DBEC9CA8 000ED8 (v01 ALASKA A M I 00000001 AMD 00000001)
ACPI: CDIT 0x00000000DBECAB80 000029 (v01 ALASKA A M I 00000001 AMD 00000001)
ACPI: SSDT 0x00000000DBECABB0 001EC3 (v01 ALASKA A M I 00000001 INTL 20160930)
ACPI: WSMT 0x00000000DBECCA78 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000081f37ffff]
NODE_DATA(0) allocated [mem 0x81f37b000-0x81f37ffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000081f37ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x0000000009e01fff]
node 0: [mem 0x000000000a000000-0x000000000a1fffff]
node 0: [mem 0x000000000a20c000-0x00000000db7f5fff]
node 0: [mem 0x00000000db98b000-0x00000000dbb0efff]
node 0: [mem 0x00000000dcbab000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x000000081f37ffff]
Zeroed struct page in unavailable ranges: 12574 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000081f37ffff]
On node 0 totalpages: 8376034
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 14128 pages used for memmap
DMA32 zone: 904133 pages, LIFO batch:63
Normal zone: 116686 pages used for memmap
Normal zone: 7467904 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 32 CPUs, 16 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x09e02000-0x09ffffff]
PM: Registered nosave memory: [mem 0x0a200000-0x0a20bfff]
PM: Registered nosave memory: [mem 0xdb7f6000-0xdb98afff]
PM: Registered nosave memory: [mem 0xdbb0f000-0xdbf2cfff]
PM: Registered nosave memory: [mem 0xdbf2d000-0xdcbaafff]
PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
PM: Registered nosave memory: [mem 0xfd000000-0xffffffff]
[mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
random: get_random_bytes called from start_kernel+0x93/0x52f with crng_init=0
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:32 nr_node_ids:1
percpu: Embedded 45 pages/cpu s144408 r8192 d31720 u262144
pcpu-alloc: s144408 r8192 d31720 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
Built 1 zonelists, mobility grouping on. Total pages: 8245135
Policy zone: Normal
log_buf_len individual max cpu contribution: 4096 bytes
log_buf_len total cpu_extra contributions: 126976 bytes
log_buf_len min size: 131072 bytes
log_buf_len: 262144 bytes
early log buf free: 120308(91%)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32827844K/33504136K available (10252K kernel code, 1241K rwdata, 3316K rodata, 1592K init, 2272K bss, 676292K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
ftrace: allocating 31900 entries in 125 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=32.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 33024, nr_irqs: 1224, preallocated irqs: 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [ttyS0] enabled
ACPI: Core revision 20180810
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 3892.745 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x70392a9eddf, max_idle_ns: 881591017141 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7785.49 BogoMIPS (lpj=15570980)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: disabled by default; enable with sysctl kernel.yama.*
AppArmor: AppArmor initialized
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 24K
smpboot: CPU0: AMD Ryzen 7 3800X 8-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
Performance Events: Fam17h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
rcu: Hierarchical SRCU implementation.
random: crng done (trusting CPU's manufacturer)
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#2
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#3
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#4
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#5
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#6
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#7
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#8
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#9
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#10
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#11
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#12
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#13
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#14
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
#15
x86/cpu: Activated the Intel User Mode Instruction Prevention (UMIP) CPU feature
smp: Brought up 1 node, 16 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 16 processors activated (124567.84 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20bfff] (49152 bytes)
PM: Registering ACPI NVS region [mem 0xdbb0f000-0xdbf2cfff] (4317184 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1598706283.192:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
Detected 1 PCC Subspaces
Registering PCC driver as Mailbox controller
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: 8 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec02fff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
pci 0000:00:00.2: [1022:1481] type 00 class 0x080600
pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
pci 0000:00:01.1: [1022:1483] type 01 class 0x060400
pci 0000:00:01.1: enabling Extended Tags
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.2: [1022:1483] type 01 class 0x060400
pci 0000:00:01.2: enabling Extended Tags
pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
pci 0000:00:07.1: enabling Extended Tags
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.2: [1022:1484] type 01 class 0x060400
pci 0000:00:08.2: enabling Extended Tags
pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
pci 0000:00:08.3: [1022:1484] type 01 class 0x060400
pci 0000:00:08.3: enabling Extended Tags
pci 0000:00:08.3: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
pci 0000:01:00.0: [c0a9:2263] type 00 class 0x010802
pci 0000:01:00.0: reg 0x10: [mem 0xfcf00000-0xfcf03fff 64bit]
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:02:00.0: [1022:57ad] type 01 class 0x060400
pci 0000:02:00.0: enabling Extended Tags
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 126.024 Gb/s with 16 GT/s x8 link)
pci 0000:00:01.2: PCI bridge to [bus 02-07]
pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
pci 0000:00:01.2: bridge window [mem 0xfc400000-0xfc8fffff]
pci 0000:03:04.0: [1022:57a3] type 01 class 0x060400
pci 0000:03:04.0: enabling Extended Tags
pci 0000:03:04.0: PME# supported from D0 D3hot D3cold
pci 0000:03:08.0: [1022:57a4] type 01 class 0x060400
pci 0000:03:08.0: enabling Extended Tags
pci 0000:03:08.0: PME# supported from D0 D3hot D3cold
pci 0000:03:09.0: [1022:57a4] type 01 class 0x060400
pci 0000:03:09.0: enabling Extended Tags
pci 0000:03:09.0: PME# supported from D0 D3hot D3cold
pci 0000:03:0a.0: [1022:57a4] type 01 class 0x060400
pci 0000:03:0a.0: enabling Extended Tags
pci 0000:03:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03-07]
pci 0000:02:00.0: bridge window [io 0xf000-0xffff]
pci 0000:02:00.0: bridge window [mem 0xfc400000-0xfc8fffff]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0xf000-0xf0ff]
pci 0000:04:00.0: reg 0x18: [mem 0xfc804000-0xfc804fff 64bit]
pci 0000:04:00.0: reg 0x20: [mem 0xfc800000-0xfc803fff 64bit]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:04.0: PCI bridge to [bus 04]
pci 0000:03:04.0: bridge window [io 0xf000-0xffff]
pci 0000:03:04.0: bridge window [mem 0xfc800000-0xfc8fffff]
pci 0000:05:00.0: [1022:1485] type 00 class 0x130000
pci 0000:05:00.0: enabling Extended Tags
pci 0000:05:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16 GT/s x16 link)
pci 0000:05:00.1: [1022:149c] type 00 class 0x0c0330
pci 0000:05:00.1: reg 0x10: [mem 0xfc500000-0xfc5fffff 64bit]
pci 0000:05:00.1: enabling Extended Tags
pci 0000:05:00.1: PME# supported from D0 D3hot D3cold
pci 0000:05:00.3: [1022:149c] type 00 class 0x0c0330
pci 0000:05:00.3: reg 0x10: [mem 0xfc400000-0xfc4fffff 64bit]
pci 0000:05:00.3: enabling Extended Tags
pci 0000:05:00.3: PME# supported from D0 D3hot D3cold
pci 0000:03:08.0: PCI bridge to [bus 05]
pci 0000:03:08.0: bridge window [mem 0xfc400000-0xfc5fffff]
pci 0000:06:00.0: [1022:7901] type 00 class 0x010601
pci 0000:06:00.0: reg 0x24: [mem 0xfc700000-0xfc7007ff]
pci 0000:06:00.0: enabling Extended Tags
pci 0000:06:00.0: PME# supported from D3hot D3cold
pci 0000:06:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16 GT/s x16 link)
pci 0000:03:09.0: PCI bridge to [bus 06]
pci 0000:03:09.0: bridge window [mem 0xfc700000-0xfc7fffff]
pci 0000:07:00.0: [1022:7901] type 00 class 0x010601
pci 0000:07:00.0: reg 0x24: [mem 0xfc600000-0xfc6007ff]
pci 0000:07:00.0: enabling Extended Tags
pci 0000:07:00.0: PME# supported from D3hot D3cold
pci 0000:07:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16 GT/s x16 link)
pci 0000:03:0a.0: PCI bridge to [bus 07]
pci 0000:03:0a.0: bridge window [mem 0xfc600000-0xfc6fffff]
pci 0000:08:00.0: [1002:67df] type 00 class 0x030000
pci 0000:08:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:08:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:08:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:08:00.0: reg 0x24: [mem 0xfce00000-0xfce3ffff]
pci 0000:08:00.0: reg 0x30: [mem 0xfce40000-0xfce5ffff pref]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:08:00.1: [1002:aaf0] type 00 class 0x040300
pci 0000:08:00.1: reg 0x10: [mem 0xfce60000-0xfce63fff 64bit]
pci 0000:08:00.1: supports D1 D2
pci 0000:00:03.1: PCI bridge to [bus 08]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xfce00000-0xfcefffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:09:00.0: [1022:148a] type 00 class 0x130000
pci 0000:09:00.0: enabling Extended Tags
pci 0000:00:07.1: PCI bridge to [bus 09]
pci 0000:0a:00.0: [1022:1485] type 00 class 0x130000
pci 0000:0a:00.0: enabling Extended Tags
pci 0000:0a:00.1: [1022:1486] type 00 class 0x108000
pci 0000:0a:00.1: reg 0x18: [mem 0xfca00000-0xfcafffff]
pci 0000:0a:00.1: reg 0x24: [mem 0xfcb08000-0xfcb09fff]
pci 0000:0a:00.1: enabling Extended Tags
pci 0000:0a:00.3: [1022:149c] type 00 class 0x0c0330
pci 0000:0a:00.3: reg 0x10: [mem 0xfc900000-0xfc9fffff 64bit]
pci 0000:0a:00.3: enabling Extended Tags
pci 0000:0a:00.3: PME# supported from D0 D3hot D3cold
pci 0000:0a:00.4: [1022:1487] type 00 class 0x040300
pci 0000:0a:00.4: reg 0x10: [mem 0xfcb00000-0xfcb07fff]
pci 0000:0a:00.4: enabling Extended Tags
pci 0000:0a:00.4: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 0a]
pci 0000:00:08.1: bridge window [mem 0xfc900000-0xfcbfffff]
pci 0000:0b:00.0: [1022:7901] type 00 class 0x010601
pci 0000:0b:00.0: reg 0x24: [mem 0xfcd00000-0xfcd007ff]
pci 0000:0b:00.0: enabling Extended Tags
pci 0000:0b:00.0: PME# supported from D3hot D3cold
pci 0000:00:08.2: PCI bridge to [bus 0b]
pci 0000:00:08.2: bridge window [mem 0xfcd00000-0xfcdfffff]
pci 0000:0c:00.0: [1022:7901] type 00 class 0x010601
pci 0000:0c:00.0: reg 0x24: [mem 0xfcc00000-0xfcc007ff]
pci 0000:0c:00.0: enabling Extended Tags
pci 0000:0c:00.0: PME# supported from D3hot D3cold
pci 0000:00:08.3: PCI bridge to [bus 0c]
pci 0000:00:08.3: bridge window [mem 0xfcc00000-0xfccfffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
pci 0000:08:00.0: vgaarb: setting as boot VGA device
pci 0000:08:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:08:00.0: vgaarb: bridge control possible
vgaarb: loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource Reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0x09e02000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0xdb7f6000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdbb0f000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x81f380000-0x81fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfd000000-0xfd0fffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0a00-0x0a2f] has been reserved
system 00:03: [io 0x0a30-0x0a3f] has been reserved
system 00:03: [io 0x0a40-0x0a4f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x040b] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c51] has been reserved
system 00:04: [io 0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cd1] has been reserved
system 00:04: [io 0x0cd2-0x0cd3] has been reserved
system 00:04: [io 0x0cd4-0x0cd5] has been reserved
system 00:04: [io 0x0cd6-0x0cd7] has been reserved
system 00:04: [io 0x0cd8-0x0cdf] has been reserved
system 00:04: [io 0x0800-0x089f] has been reserved
system 00:04: [io 0x0b00-0x0b0f] has been reserved
system 00:04: [io 0x0b20-0x0b3f] has been reserved
system 00:04: [io 0x0900-0x090f] has been reserved
system 00:04: [io 0x0910-0x091f] has been reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:03:04.0: PCI bridge to [bus 04]
pci 0000:03:04.0: bridge window [io 0xf000-0xffff]
pci 0000:03:04.0: bridge window [mem 0xfc800000-0xfc8fffff]
pci 0000:03:08.0: PCI bridge to [bus 05]
pci 0000:03:08.0: bridge window [mem 0xfc400000-0xfc5fffff]
pci 0000:03:09.0: PCI bridge to [bus 06]
pci 0000:03:09.0: bridge window [mem 0xfc700000-0xfc7fffff]
pci 0000:03:0a.0: PCI bridge to [bus 07]
pci 0000:03:0a.0: bridge window [mem 0xfc600000-0xfc6fffff]
pci 0000:02:00.0: PCI bridge to [bus 03-07]
pci 0000:02:00.0: bridge window [io 0xf000-0xffff]
pci 0000:02:00.0: bridge window [mem 0xfc400000-0xfc8fffff]
pci 0000:00:01.2: PCI bridge to [bus 02-07]
pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
pci 0000:00:01.2: bridge window [mem 0xfc400000-0xfc8fffff]
pci 0000:00:03.1: PCI bridge to [bus 08]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xfce00000-0xfcefffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 09]
pci 0000:00:08.1: PCI bridge to [bus 0a]
pci 0000:00:08.1: bridge window [mem 0xfc900000-0xfcbfffff]
pci 0000:00:08.2: PCI bridge to [bus 0b]
pci 0000:00:08.2: bridge window [mem 0xfcd00000-0xfcdfffff]
pci 0000:00:08.3: PCI bridge to [bus 0c]
pci 0000:00:08.3: bridge window [mem 0xfcc00000-0xfccfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec02fff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff]
pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
pci_bus 0000:02: resource 1 [mem 0xfc400000-0xfc8fffff]
pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
pci_bus 0000:03: resource 1 [mem 0xfc400000-0xfc8fffff]
pci_bus 0000:04: resource 0 [io 0xf000-0xffff]
pci_bus 0000:04: resource 1 [mem 0xfc800000-0xfc8fffff]
pci_bus 0000:05: resource 1 [mem 0xfc400000-0xfc5fffff]
pci_bus 0000:06: resource 1 [mem 0xfc700000-0xfc7fffff]
pci_bus 0000:07: resource 1 [mem 0xfc600000-0xfc6fffff]
pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
pci_bus 0000:08: resource 1 [mem 0xfce00000-0xfcefffff]
pci_bus 0000:08: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:0a: resource 1 [mem 0xfc900000-0xfcbfffff]
pci_bus 0000:0b: resource 1 [mem 0xfcd00000-0xfcdfffff]
pci_bus 0000:0c: resource 1 [mem 0xfcc00000-0xfccfffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:08:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:08:00.1: Linked as a consumer to 0000:08:00.0
pci 0000:08:00.1: D0 power state depends on 0000:08:00.0
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 55204K
AMD-Vi: IOMMU performance counters supported
iommu: Adding device 0000:00:01.0 to group 0
iommu: Adding device 0000:00:01.1 to group 0
iommu: Adding device 0000:00:01.2 to group 0
iommu: Adding device 0000:00:02.0 to group 1
iommu: Adding device 0000:00:03.0 to group 2
iommu: Adding device 0000:00:03.1 to group 2
iommu: Adding device 0000:00:04.0 to group 3
iommu: Adding device 0000:00:05.0 to group 4
iommu: Adding device 0000:00:07.0 to group 5
iommu: Adding device 0000:00:07.1 to group 6
iommu: Adding device 0000:00:08.0 to group 7
iommu: Adding device 0000:00:08.1 to group 8
iommu: Adding device 0000:00:08.2 to group 9
iommu: Adding device 0000:00:08.3 to group 10
iommu: Adding device 0000:00:14.0 to group 11
iommu: Adding device 0000:00:14.3 to group 11
iommu: Adding device 0000:00:18.0 to group 12
iommu: Adding device 0000:00:18.1 to group 12
iommu: Adding device 0000:00:18.2 to group 12
iommu: Adding device 0000:00:18.3 to group 12
iommu: Adding device 0000:00:18.4 to group 12
iommu: Adding device 0000:00:18.5 to group 12
iommu: Adding device 0000:00:18.6 to group 12
iommu: Adding device 0000:00:18.7 to group 12
iommu: Adding device 0000:01:00.0 to group 0
iommu: Adding device 0000:02:00.0 to group 0
iommu: Adding device 0000:03:04.0 to group 0
iommu: Adding device 0000:03:08.0 to group 0
iommu: Adding device 0000:03:09.0 to group 0
iommu: Adding device 0000:03:0a.0 to group 0
iommu: Adding device 0000:04:00.0 to group 0
iommu: Adding device 0000:05:00.0 to group 0
iommu: Adding device 0000:05:00.1 to group 0
iommu: Adding device 0000:05:00.3 to group 0
iommu: Adding device 0000:06:00.0 to group 0
iommu: Adding device 0000:07:00.0 to group 0
iommu: Adding device 0000:08:00.0 to group 2
iommu: Adding device 0000:08:00.1 to group 2
iommu: Adding device 0000:09:00.0 to group 13
iommu: Adding device 0000:0a:00.0 to group 14
iommu: Adding device 0000:0a:00.1 to group 15
iommu: Adding device 0000:0a:00.3 to group 16
iommu: Adding device 0000:0a:00.4 to group 17
iommu: Adding device 0000:0b:00.0 to group 18
iommu: Adding device 0000:0c:00.0 to group 19
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features (0x58f77ef22294ade):
PPR X2APIC NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: virtual APIC enabled
AMD-Vi: X2APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000003ff)
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=40 max_order=23 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
pcieport 0000:00:01.1: Signaling PME with IRQ 27
pcieport 0000:00:01.2: Signaling PME with IRQ 28
pcieport 0000:00:03.1: Signaling PME with IRQ 29
pcieport 0000:00:07.1: Signaling PME with IRQ 31
pcieport 0000:00:07.1: AER enabled with IRQ 31
pcieport 0000:00:08.1: Signaling PME with IRQ 32
pcieport 0000:00:08.1: AER enabled with IRQ 32
pcieport 0000:00:08.2: Signaling PME with IRQ 33
pcieport 0000:00:08.2: AER enabled with IRQ 33
pcieport 0000:00:08.3: Signaling PME with IRQ 34
pcieport 0000:00:08.3: AER enabled with IRQ 34
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Monitor-Mwait will be used to enter C-1 state
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
mce: Using 28 MCE banks
microcode: CPU0: patch_level=0x08701013
microcode: CPU1: patch_level=0x08701013
microcode: CPU2: patch_level=0x08701013
microcode: CPU3: patch_level=0x08701013
microcode: CPU4: patch_level=0x08701013
microcode: CPU5: patch_level=0x08701013
microcode: CPU6: patch_level=0x08701013
microcode: CPU7: patch_level=0x08701013
microcode: CPU8: patch_level=0x08701013
microcode: CPU9: patch_level=0x08701013
microcode: CPU10: patch_level=0x08701013
microcode: CPU11: patch_level=0x08701013
microcode: CPU12: patch_level=0x08701013
microcode: CPU13: patch_level=0x08701013
microcode: CPU14: patch_level=0x08701013
microcode: CPU15: patch_level=0x08701013
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (817554481, -27994651)->(800778723, -11218893)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
zswap: loaded using pool lzo/zbud
AppArmor: AppArmor sha1 policy hashing enabled
rtc_cmos 00:02: setting system clock to 2020-08-29 13:04:44 UTC (1598706284)
Freeing unused kernel image memory: 1592K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel image memory: 2028K
Freeing unused kernel image memory: 780K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
systemd-udevd[174]: /usr/lib/udev/rules.d/50-udev-default.rules:18: Invalid GROUP operation
systemd-udevd[174]: /usr/lib/udev/rules.d/50-udev-default.rules:19: Invalid GROUP operation
systemd-udevd[174]: /usr/lib/udev/rules.d/50-udev-default.rules:20: Invalid GROUP operation
systemd-udevd[174]: /usr/lib/udev/rules.d/50-udev-default.rules:21: Invalid GROUP operation
systemd-udevd[174]: /usr/lib/udev/rules.d/50-udev-default.rules:22: Invalid GROUP operation
systemd-udevd[174]: /usr/lib/udev/rules.d/50-udev-default.rules:23: Invalid GROUP operation
systemd-udevd[174]: /usr/lib/udev/rules.d/50-udev-default.rules:24: Invalid GROUP operation
systemd-udevd[174]: /usr/lib/udev/rules.d/50-udev-default.rules:25: Invalid GROUP operation
systemd-udevd[174]: /usr/lib/udev/rules.d/50-udev-default.rules:27: Invalid GROUP operation
systemd-udevd[174]: /usr/lib/udev/rules.d/50-udev-default.rules:29: Invalid GROUP operation
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20180810/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
nvme nvme0: pci function 0000:01:00.0
SCSI subsystem initialized
cryptd: max_cpu_qlen set to 1000
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
libata version 3.00 loaded.
xhci_hcd 0000:05:00.1: xHCI Host Controller
xhci_hcd 0000:05:00.1: new USB bus registered, assigned bus number 1
xhci_hcd 0000:05:00.1: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
ahci 0000:06:00.0: version 3.0
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.19.0-10-amd64 xhci-hcd
usb usb1: SerialNumber: 0000:05:00.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ahci 0000:06:00.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0xc impl SATA mode
ahci 0000:06:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part sxs
ahci 0000:06:00.0: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: DUMMY
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xfc700000 port 0xfc700200 irq 42
ata4: SATA max UDMA/133 abar m2048@0xfc700000 port 0xfc700280 irq 43
ahci 0000:07:00.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0x33 impl SATA mode
ahci 0000:07:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part sxs
ahci 0000:07:00.0: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
ata5: SATA max UDMA/133 abar m2048@0xfc600000 port 0xfc600100 irq 56
ata6: SATA max UDMA/133 abar m2048@0xfc600000 port 0xfc600180 irq 57
ata7: DUMMY
ata8: DUMMY
ata9: SATA max UDMA/133 abar m2048@0xfc600000 port 0xfc600300 irq 60
ata10: SATA max UDMA/133 abar m2048@0xfc600000 port 0xfc600380 irq 61
ahci 0000:0b:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:0b:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host10: ahci
ata11: SATA max UDMA/133 abar m2048@0xfcd00000 port 0xfcd00100 irq 73
ahci 0000:0c:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:0c:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host11: ahci
ata12: SATA max UDMA/133 abar m2048@0xfcc00000 port 0xfcc00100 irq 75
xhci_hcd 0000:05:00.1: xHCI Host Controller
xhci_hcd 0000:05:00.1: new USB bus registered, assigned bus number 2
xhci_hcd 0000:05:00.1: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.19.0-10-amd64 xhci-hcd
usb usb2: SerialNumber: 0000:05:00.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
xhci_hcd 0000:05:00.3: xHCI Host Controller
xhci_hcd 0000:05:00.3: new USB bus registered, assigned bus number 3
xhci_hcd 0000:05:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.19.0-10-amd64 xhci-hcd
usb usb3: SerialNumber: 0000:05:00.3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
xhci_hcd 0000:05:00.3: xHCI Host Controller
xhci_hcd 0000:05:00.3: new USB bus registered, assigned bus number 4
xhci_hcd 0000:05:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.19.0-10-amd64 xhci-hcd
usb usb4: SerialNumber: 0000:05:00.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
usb: port power management may be unreliable
xhci_hcd 0000:0a:00.3: xHCI Host Controller
xhci_hcd 0000:0a:00.3: new USB bus registered, assigned bus number 5
xhci_hcd 0000:0a:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
libphy: r8169: probed
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.19.0-10-amd64 xhci-hcd
usb usb5: SerialNumber: 0000:0a:00.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
r8169 0000:04:00.0 eth0: RTL8168h/8111h, b4:2e:99:86:95:b3, XID 54100800, IRQ 77
r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
xhci_hcd 0000:0a:00.3: xHCI Host Controller
xhci_hcd 0000:0a:00.3: new USB bus registered, assigned bus number 6
xhci_hcd 0000:0a:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.19.0-10-amd64 xhci-hcd
usb usb6: SerialNumber: 0000:0a:00.3
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
r8169 0000:04:00.0 enp4s0: renamed from eth0
[drm] amdgpu kernel modesetting enabled.
Parsing CRAT table with 1 nodes
Ignoring ACPI CRAT on non-APU system
Virtual CRAT table created for CPU
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add CPU node
Finished initializing topology
kfd kfd: Initialized module
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1043:0x0525 0xE7).
[drm] register mmio base: 0xFCE00000
[drm] register mmio size: 262144
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
amdgpu 0000:08:00.0: No more image in the PCI ROM
ATOM BIOS: 115-D009PI2-101
[drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
amdgpu 0000:08:00.0: firmware: direct-loading firmware amdgpu/polaris10_mc.bin
amdgpu 0000:08:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
amdgpu 0000:08:00.0: GART: 256M 0x0000000000000000 - 0x000000000FFFFFFF
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 256bits GDDR5
[TTM] Zone kernel: Available graphics memory: 16476712 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400900000).
amdgpu 0000:08:00.0: firmware: direct-loading firmware amdgpu/polaris10_pfp_2.bin
amdgpu 0000:08:00.0: firmware: direct-loading firmware amdgpu/polaris10_me_2.bin
amdgpu 0000:08:00.0: firmware: direct-loading firmware amdgpu/polaris10_ce_2.bin
[drm] Chained IB support enabled!
amdgpu 0000:08:00.0: firmware: direct-loading firmware amdgpu/polaris10_rlc.bin
amdgpu 0000:08:00.0: firmware: direct-loading firmware amdgpu/polaris10_mec_2.bin
amdgpu 0000:08:00.0: firmware: direct-loading firmware amdgpu/polaris10_mec2_2.bin
amdgpu 0000:08:00.0: firmware: direct-loading firmware amdgpu/polaris10_sdma.bin
amdgpu 0000:08:00.0: firmware: direct-loading firmware amdgpu/polaris10_sdma1.bin
amdgpu 0000:08:00.0: firmware: direct-loading firmware amdgpu/polaris10_uvd.bin
[drm] Found UVD firmware Version: 1.130 Family ID: 16
amdgpu 0000:08:00.0: firmware: direct-loading firmware amdgpu/polaris10_vce.bin
[drm] Found VCE firmware Version: 53.26 Binary ID: 3
amdgpu 0000:08:00.0: firmware: direct-loading firmware amdgpu/polaris10_k_smc.bin
amdgpu: [powerplay] Failed to retrieve minimum clocks.
amdgpu: [powerplay] Error in phm_get_clock_info
[drm] DM_PPLIB: values for Engine clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 600000
[drm] DM_PPLIB: 900000
[drm] DM_PPLIB: 1062000
[drm] DM_PPLIB: 1064000
[drm] DM_PPLIB: 1066000
[drm] DM_PPLIB: 1068000
[drm] DM_PPLIB: 1070000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 107000
[drm] DM_PPLIB: memory_max_clock: 200000
[drm] DM_PPLIB: level : 8
[drm] DM_PPLIB: values for Memory clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 1000000
[drm] DM_PPLIB: 2000000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 107000
[drm] DM_PPLIB: memory_max_clock: 200000
[drm] DM_PPLIB: level : 8
[drm] Display Core initialized with v3.1.59!
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nvme nvme0: missing or invalid SUBNQN field.
nvme0n1: p1 p2 < p5 >
[drm] UVD and UVD ENC initialized successfully.
ata4: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
[drm] VCE initialized successfully.
kfd kfd: Allocated 3969056 bytes on gart
Virtual CRAT table created for GPU
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add dGPU node [0x67df:0x1002]
kfd kfd: added device 1002:67df
[drm] fb mappable at 0xE0E28000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
usb 5-3: new full-speed USB device number 2 using xhci_hcd
usb 3-6: new full-speed USB device number 2 using xhci_hcd
Console: switching to colour frame buffer device 240x67
amdgpu 0000:08:00.0: fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.27.0 20150101 for 0000:08:00.0 on minor 0
usb 3-6: New USB device found, idVendor=048d, idProduct=8297, bcdDevice= 0.03
usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-6: Product: ITE Device(8595)
usb 3-6: Manufacturer: ITE Tech. Inc.
usb 5-3: New USB device found, idVendor=093a, idProduct=2532, bcdDevice= 1.00
usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-3: Product: Gaming Mouse
usb 5-3: Manufacturer: PixArt
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hid-generic 0003:048D:8297.0001: hiddev0,hidraw0: USB HID v1.10 Device [ITE Tech. Inc. ITE Device(8595)] on usb-0000:05:00.3-6/input0
input: PixArt Gaming Mouse as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb5/5-3/5-3:1.0/0003:093A:2532.0002/input/input2
hid-generic 0003:093A:2532.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt Gaming Mouse] on usb-0000:0a:00.3-3/input0
input: PixArt Gaming Mouse Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb5/5-3/5-3:1.1/0003:093A:2532.0003/input/input4
input: PixArt Gaming Mouse Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb5/5-3/5-3:1.1/0003:093A:2532.0003/input/input5
hid-generic 0003:093A:2532.0003: input,hiddev1,hidraw2: USB HID v1.11 Keyboard [PixArt Gaming Mouse] on usb-0000:0a:00.3-3/input1
tsc: Refined TSC clocksource calibration: 3892.685 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x7038b8db878, max_idle_ns: 881590710692 ns
clocksource: Switched to clocksource tsc
usb 5-4: new low-speed USB device number 3 using xhci_hcd
usb 5-4: New USB device found, idVendor=1a2c, idProduct=4d44, bcdDevice= 1.10
usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-4: Product: USB Keyboard
usb 5-4: Manufacturer: SEMICO
input: SEMICO USB Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb5/5-4/5-4:1.0/0003:1A2C:4D44.0004/input/input6
hid-generic 0003:1A2C:4D44.0004: input,hidraw3: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-0000:0a:00.3-4/input0
input: SEMICO USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb5/5-4/5-4:1.1/0003:1A2C:4D44.0005/input/input7
input: SEMICO USB Keyboard System Control as /devices/pci0000:00/0000:00:08.1/0000:0a:00.3/usb5/5-4/5-4:1.1/0003:1A2C:4D44.0005/input/input8
hid-generic 0003:1A2C:4D44.0005: input,hidraw4: USB HID v1.10 Device [SEMICO USB Keyboard] on usb-0000:0a:00.3-4/input1
ACPI: Invalid passive threshold
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ10] (17 C)
ACPI: Invalid passive threshold
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [PCT0] (17 C)
raid6: sse2x1 gen() 8911 MB/s
raid6: sse2x1 xor() 9118 MB/s
raid6: sse2x2 gen() 17482 MB/s
raid6: sse2x2 xor() 12377 MB/s
raid6: sse2x4 gen() 19570 MB/s
raid6: sse2x4 xor() 10964 MB/s
raid6: avx2x1 gen() 21235 MB/s
raid6: avx2x1 xor() 17666 MB/s
raid6: avx2x2 gen() 37865 MB/s
raid6: avx2x2 xor() 23439 MB/s
raid6: avx2x4 gen() 39386 MB/s
raid6: avx2x4 xor() 16951 MB/s
raid6: using algorithm avx2x4 gen() 39386 MB/s
raid6: .... xor() 16951 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
async_tx: api initialized (async)
Btrfs loaded, crc32c=crc32c-intel
PM: Image not found (code -22)
EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
systemd-udevd: 34 output lines suppressed due to ratelimiting
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/auditd.service:11: PIDFile= references path below legacy directory /var/run/, updating /var/run/auditd.pid → /run/auditd.pid; please update the unit file accordingly.
systemd[1]: /lib/systemd/system/netdata.service:10: PIDFile= references path below legacy directory /var/run/, updating /var/run/netdata/netdata.pid → /run/netdata/netdata.pid; please update the unit file accordingly.
systemd[1]: /lib/systemd/system/fancontrol.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly.
systemd[1]: /lib/systemd/system/fail2ban.service:12: PIDFile= references path below legacy directory /var/run/, updating /var/run/fail2ban/fail2ban.pid → /run/fail2ban/fail2ban.pid; please update the unit file accordingly.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on initctl Compatibility Named Pipe.
EXT4-fs (nvme0n1p1): re-mounted. Opts: errors=remount-ro
fuse init (API version 7.27)
acpi_cpufreq: overriding BIOS provided _PSD data
ccp 0000:0a:00.1: ccp enabled
ccp 0000:0a:00.1: psp initialization failed
ccp 0000:0a:00.1: enabled
snd_hda_intel 0000:08:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:08:00.1: Force to non-snoop mode
input: PC Speaker as /devices/platform/pcspkr/input/input9
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
sp5100-tco sp5100-tco: Watchdog hardware is disabled
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:08:00.1/sound/card0/input10
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:08:00.1/sound/card0/input11
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:08:00.1/sound/card0/input12
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:08:00.1/sound/card0/input13
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:08:00.1/sound/card0/input14
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:08:00.1/sound/card0/input15
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
Adding 33503228k swap on /dev/nvme0n1p5. Priority:-2 extents:1 across:33503228k SSFS
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0a:00.4/sound/card1/input16
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0a:00.4/sound/card1/input17
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0a:00.4/sound/card1/input18
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0a:00.4/sound/card1/input19
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0a:00.4/sound/card1/input20
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
SVM: Virtual VMLOAD VMSAVE supported
SVM: Virtual GIF supported
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
audit: type=1400 audit(1598706288.329:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=686 comm="apparmor_parser"
audit: type=1400 audit(1598706288.329:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=682 comm="apparmor_parser"
audit: type=1400 audit(1598706288.329:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=680 comm="apparmor_parser"
audit: type=1400 audit(1598706288.329:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=688 comm="apparmor_parser"
audit: type=1400 audit(1598706288.329:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=688 comm="apparmor_parser"
audit: type=1400 audit(1598706288.329:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=692 comm="apparmor_parser"
audit: type=1400 audit(1598706288.329:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=684 comm="apparmor_parser"
audit: type=1400 audit(1598706288.329:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=684 comm="apparmor_parser"
audit: type=1400 audit(1598706288.329:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=684 comm="apparmor_parser"
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
systemd-journald[463]: Received request to flush runtime journal from PID 1
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
Process accounting resumed
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
zram: Added device: zram0
zram: Added device: zram1
zram: Added device: zram2
zram: Added device: zram3
zram: Added device: zram4
zram: Added device: zram5
zram: Added device: zram6
zram: Added device: zram7
zram: Added device: zram8
zram: Added device: zram9
zram: Added device: zram10
zram: Added device: zram11
zram: Added device: zram12
zram: Added device: zram13
zram: Added device: zram14
zram: Added device: zram15
zram0: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram0. Priority:100 extents:1 across:16380k SSFS
zram1: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram1. Priority:100 extents:1 across:16380k SSFS
zram2: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram2. Priority:100 extents:1 across:16380k SSFS
zram3: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram3. Priority:100 extents:1 across:16380k SSFS
zram4: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram4. Priority:100 extents:1 across:16380k SSFS
zram5: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram5. Priority:100 extents:1 across:16380k SSFS
zram6: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram6. Priority:100 extents:1 across:16380k SSFS
zram7: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram7. Priority:100 extents:1 across:16380k SSFS
zram8: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram8. Priority:100 extents:1 across:16380k SSFS
zram9: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram9. Priority:100 extents:1 across:16380k SSFS
zram10: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram10. Priority:100 extents:1 across:16380k SSFS
zram11: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram11. Priority:100 extents:1 across:16380k SSFS
zram12: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram12. Priority:100 extents:1 across:16380k SSFS
zram13: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram13. Priority:100 extents:1 across:16380k SSFS
zram14: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram14. Priority:100 extents:1 across:16380k SSFS
zram15: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram15. Priority:100 extents:1 across:16380k SSFS
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
r8169 0000:04:00.0: firmware: failed to load rtl_nic/rtl8168h-2.fw (-2)
firmware_class: See for information about missing firmware
r8169 0000:04:00.0: Direct firmware load for rtl_nic/rtl8168h-2.fw failed with error -2
r8169 0000:04:00.0 enp4s0: unable to load firmware patch rtl_nic/rtl8168h-2.fw (-2)
Generic PHY r8169-400:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
trace_kprobe: Event kprobes/p_netdata_vfs_write_0 doesn't exist.
trace_kprobe: Event kprobes/p_netdata_tcp_cleanup_rbuf_0 doesn't exist.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
r8169 0000:04:00.0 enp4s0: Link is Up - 1Gbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
vmmon: loading out-of-tree module taints kernel.
vmmon: module verification failed: signature and/or required key missing - tainting kernel
/dev/vmmon[1791]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[1791]: Using tsc_khz as TSC frequency: 3892685
/dev/vmmon[1791]: Module vmmon: initialized
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=58)
Initialized host personality
NET: Registered protocol family 40
ppdev: user-space parallel port driver
alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
tun: Universal TUN/TAP device driver, 1.6
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
userif-3: sent link down event.
userif-3: sent link up event.
device enp4s0 entered promiscuous mode
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
device virbr0 entered promiscuous mode
device vmnet1 entered promiscuous mode
device vmnet8 entered promiscuous mode
virbr0: port 2(vnet0) entered blocking state
virbr0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
virbr0: port 2(vnet0) entered blocking state
virbr0: port 2(vnet0) entered listening state
cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 3(vnet1) entered blocking state
virbr0: port 3(vnet1) entered disabled state
device vnet1 entered promiscuous mode
virbr0: port 3(vnet1) entered blocking state
virbr0: port 3(vnet1) entered listening state
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 4(vnet2) entered blocking state
virbr0: port 4(vnet2) entered disabled state
device vnet2 entered promiscuous mode
virbr0: port 4(vnet2) entered blocking state
virbr0: port 4(vnet2) entered listening state
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 5(vnet3) entered blocking state
virbr0: port 5(vnet3) entered disabled state
device vnet3 entered promiscuous mode
virbr0: port 5(vnet3) entered blocking state
virbr0: port 5(vnet3) entered listening state
virbr0: port 2(vnet0) entered learning state
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 3(vnet1) entered learning state
virbr0: port 4(vnet2) entered learning state
virbr0: port 5(vnet3) entered learning state
virbr0: port 2(vnet0) entered forwarding state
virbr0: topology change detected, propagating
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 3(vnet1) entered forwarding state
virbr0: topology change detected, propagating
virbr0: port 4(vnet2) entered forwarding state
virbr0: topology change detected, propagating
virbr0: port 5(vnet3) entered forwarding state
virbr0: topology change detected, propagating
virbr0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
virbr0: port 2(vnet0) entered disabled state
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 3(vnet1) entered disabled state
device vnet1 left promiscuous mode
virbr0: port 3(vnet1) entered disabled state
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 4(vnet2) entered disabled state
device vnet2 left promiscuous mode
virbr0: port 4(vnet2) entered disabled state
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 5(vnet3) entered disabled state
device vnet3 left promiscuous mode
virbr0: port 5(vnet3) entered disabled state
userif-3: sent link down event.
userif-3: sent link up event.
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 2(vnet0) entered blocking state
virbr0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
virbr0: port 2(vnet0) entered blocking state
virbr0: port 2(vnet0) entered listening state
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 2(vnet0) entered learning state
virbr0: port 2(vnet0) entered forwarding state
virbr0: topology change detected, propagating
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
virbr0: port 2(vnet0) entered disabled state
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 2(vnet0) entered blocking state
virbr0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
virbr0: port 2(vnet0) entered blocking state
virbr0: port 2(vnet0) entered listening state
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 2(vnet0) entered learning state
virbr0: port 2(vnet0) entered forwarding state
virbr0: topology change detected, propagating
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 3(vnet1) entered blocking state
virbr0: port 3(vnet1) entered disabled state
device vnet1 entered promiscuous mode
virbr0: port 3(vnet1) entered blocking state
virbr0: port 3(vnet1) entered listening state
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 3(vnet1) entered learning state
virbr0: port 3(vnet1) entered forwarding state
virbr0: topology change detected, propagating
virbr0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
virbr0: port 2(vnet0) entered disabled state
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 2(vnet0) entered blocking state
virbr0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
virbr0: port 2(vnet0) entered blocking state
virbr0: port 2(vnet0) entered listening state
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 2(vnet0) entered learning state
virbr0: port 2(vnet0) entered forwarding state
virbr0: topology change detected, propagating
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 4(vnet2) entered blocking state
virbr0: port 4(vnet2) entered disabled state
device vnet2 entered promiscuous mode
virbr0: port 4(vnet2) entered blocking state
virbr0: port 4(vnet2) entered listening state
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 4(vnet2) entered learning state
virbr0: port 4(vnet2) entered forwarding state
virbr0: topology change detected, propagating
show_signal_msg: 11 callbacks suppressed
netdata[1154]: segfault at 20 ip 00007f6f4f7f81a7 sp 00007ffc8c73cff8 error 4 in libc-2.28.so[7f6f4f6be000+148000]
Code: f9 20 77 1f c5 fd 74 0f c5 fd d7 c1 85 c0 0f 85 df 00 00 00 48 83 c7 20 83 e1 1f 48 83 e7 e0 eb 36 66 90 83 e1 1f 48 83 e7 e0 fd 74 0f c5 fd d7 c1 d3 f8 85 c0 74 1b f3 0f bc c0 48 01 f8 48
trace_kprobe: Event kprobes/p_netdata_vfs_write_0 doesn't exist.
trace_kprobe: Event kprobes/p_netdata_tcp_cleanup_rbuf_0 doesn't exist.
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 3(vnet1) entered disabled state
device vnet1 left promiscuous mode
virbr0: port 3(vnet1) entered disabled state
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 4(vnet2) entered disabled state
device vnet2 left promiscuous mode
virbr0: port 4(vnet2) entered disabled state
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
virbr0: port 2(vnet0) entered disabled state
userif-3: sent link down event.
userif-3: sent link up event.
zram: Removed device: zram0
zram: Removed device: zram1
zram: Removed device: zram2
zram: Removed device: zram3
zram: Removed device: zram4
zram: Removed device: zram5
zram: Removed device: zram6
zram: Removed device: zram7
zram: Removed device: zram8
zram: Removed device: zram9
zram: Removed device: zram10
zram: Removed device: zram11
zram: Removed device: zram12
zram: Removed device: zram13
zram: Removed device: zram14
zram: Removed device: zram15
zram: Added device: zram0
zram: Added device: zram1
zram: Added device: zram2
zram: Added device: zram3
zram: Added device: zram4
zram: Added device: zram5
zram: Added device: zram6
zram: Added device: zram7
zram: Added device: zram8
zram: Added device: zram9
zram: Added device: zram10
zram: Added device: zram11
zram: Added device: zram12
zram: Added device: zram13
zram: Added device: zram14
zram: Added device: zram15
zram0: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram0. Priority:100 extents:1 across:16380k SSFS
zram1: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram1. Priority:100 extents:1 across:16380k SSFS
zram2: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram2. Priority:100 extents:1 across:16380k SSFS
zram3: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram3. Priority:100 extents:1 across:16380k SSFS
zram4: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram4. Priority:100 extents:1 across:16380k SSFS
zram5: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram5. Priority:100 extents:1 across:16380k SSFS
zram6: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram6. Priority:100 extents:1 across:16380k SSFS
zram7: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram7. Priority:100 extents:1 across:16380k SSFS
zram8: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram8. Priority:100 extents:1 across:16380k SSFS
zram9: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram9. Priority:100 extents:1 across:16380k SSFS
zram10: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram10. Priority:100 extents:1 across:16380k SSFS
zram11: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram11. Priority:100 extents:1 across:16380k SSFS
zram12: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram12. Priority:100 extents:1 across:16380k SSFS
zram13: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram13. Priority:100 extents:1 across:16380k SSFS
zram14: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram14. Priority:100 extents:1 across:16380k SSFS
zram15: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram15. Priority:100 extents:1 across:16380k SSFS
zram: Removed device: zram0
zram: Removed device: zram1
zram: Removed device: zram2
zram: Removed device: zram3
zram: Removed device: zram4
zram: Removed device: zram5
zram: Removed device: zram6
zram: Removed device: zram7
zram: Removed device: zram8
zram: Removed device: zram9
zram: Removed device: zram10
zram: Removed device: zram11
zram: Removed device: zram12
zram: Removed device: zram13
zram: Removed device: zram14
zram: Removed device: zram15
zram: Added device: zram0
zram: Added device: zram1
zram: Added device: zram2
zram: Added device: zram3
zram: Added device: zram4
zram: Added device: zram5
zram: Added device: zram6
zram: Added device: zram7
zram: Added device: zram8
zram: Added device: zram9
zram: Added device: zram10
zram: Added device: zram11
zram: Added device: zram12
zram: Added device: zram13
zram: Added device: zram14
zram: Added device: zram15
zram0: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram0. Priority:100 extents:1 across:16380k SSFS
zram1: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram1. Priority:100 extents:1 across:16380k SSFS
zram2: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram2. Priority:100 extents:1 across:16380k SSFS
zram3: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram3. Priority:100 extents:1 across:16380k SSFS
zram4: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram4. Priority:100 extents:1 across:16380k SSFS
zram5: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram5. Priority:100 extents:1 across:16380k SSFS
zram6: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram6. Priority:100 extents:1 across:16380k SSFS
zram7: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram7. Priority:100 extents:1 across:16380k SSFS
zram8: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram8. Priority:100 extents:1 across:16380k SSFS
zram9: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram9. Priority:100 extents:1 across:16380k SSFS
zram10: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram10. Priority:100 extents:1 across:16380k SSFS
zram11: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram11. Priority:100 extents:1 across:16380k SSFS
zram12: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram12. Priority:100 extents:1 across:16380k SSFS
zram13: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram13. Priority:100 extents:1 across:16380k SSFS
zram14: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram14. Priority:100 extents:1 across:16380k SSFS
zram15: detected capacity change from 0 to 16777216
Adding 16380k swap on /dev/zram15. Priority:100 extents:1 across:16380k SSFS
zram: Removed device: zram0
zram: Removed device: zram1
zram: Removed device: zram2
zram: Removed device: zram3
zram: Removed device: zram4
zram: Removed device: zram5
zram: Removed device: zram6
zram: Removed device: zram7
zram: Removed device: zram8
zram: Removed device: zram9
zram: Removed device: zram10
zram: Removed device: zram11
zram: Removed device: zram12
zram: Removed device: zram13
zram: Removed device: zram14
zram: Removed device: zram15
virbr0: port 2(vnet0) entered blocking state
virbr0: port 2(vnet0) entered disabled state
device vnet0 entered promiscuous mode
virbr0: port 2(vnet0) entered blocking state
virbr0: port 2(vnet0) entered listening state
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 2(vnet0) entered learning state
virbr0: port 2(vnet0) entered forwarding state
virbr0: topology change detected, propagating
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 3(vnet1) entered blocking state
virbr0: port 3(vnet1) entered disabled state
device vnet1 entered promiscuous mode
virbr0: port 3(vnet1) entered blocking state
virbr0: port 3(vnet1) entered listening state
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 3(vnet1) entered learning state
virbr0: port 3(vnet1) entered forwarding state
virbr0: topology change detected, propagating
radeontop[25137]: segfault at 7fe17d072010 ip 00005610b5b09815 sp 00007fe17c0e6da0 error 4 in radeontop[5610b5b05000+5000]
Code: 0f 1f 44 00 00 48 83 ec 18 64 48 8b 04 25 28 00 00 00 48 89 44 24 08 31 c0 8b 05 5e 3e 00 00 85 c0 75 22 48 8b 05 5b 3e 00 00 40 10 48 8b 4c 24 08 64 48 33 0c 25 28 00 00 00 75 2b 48 83 c4
traps: brave[32131] trap int3 ip:55ae06c87cea sp:7ffd8e349210 error:0 in brave[55adff209000+83f1000]
virbr0: port 4(vnet2) entered blocking state
virbr0: port 4(vnet2) entered disabled state
device vnet2 entered promiscuous mode
virbr0: port 4(vnet2) entered blocking state
virbr0: port 4(vnet2) entered listening state
userif-3: sent link down event.
userif-3: sent link up event.
virbr0: port 4(vnet2) entered learning state
virbr0: port 4(vnet2) entered forwarding state
virbr0: topology change detected, propagating